Watch this demo of the Roll-n-Vac extracting water, stones & sand! In other words, see how versatile the Roll-n-Vac Industrial Extractor is. We us a clear 30 gallon bucket for the water. Thus, you can see how fast the Roll-n-Vac can suck it up. On level ground it picks up 20 gallons of water in only 10 seconds. The Roll-n-Vac can also suck water 8 feet up from bottom of a pool. 200lbs of sand and 10 gallons of water is extracted in just 3 minutes. The Roll-n-Vac will also suck up dry materials such as sand and small stones quickly. The best part about extracting water, stones & sand with the Roll-n-Vac is that it deposits everything directly into your wheelbarrow. All ready for disposal!
The Roll-n-Vac can be used from above. This is a great feature when sucking up green slime from the bottom of a pool. It’s most popular application is probably for clearing the old sand out of sand filters during sand filter changes. It allows pool pros to do a sand filter change in just a fraction of the time.
The Roll-n-Vac is good for so much more that sand & water extraction. You can use it to vacuum pool liners during installation. It is so good at picking up slime and debris from the bottom of a pool that it can fill a wheelbarrow in just 40 seconds. It can even be used as a blower when the hose is plugged into the exhaust. Furthermore, if paired with a power washer or an air spade the Roll-n-Vac can assist in carefully digging up pipes or underground wiring. Lastly, use the roll-n-vac in plumbing applications to unclog pipes.
To purchase a Roll-n-Vac go to: https://roll-n-vac.com/
Click here for more posts about pool maintenance and construction.
Leave a Reply
You must be logged in to post a comment.