This is an overview of the RNVac seal installation. Installing the seals along with some silicone will properly seal your wheelbarrow. This is recommended for use with the RNVac. A properly sealed wheelbarrow means more power from your RNVac. For more information on the RNVac Industrial Vacuum go to: https://roll-n-vac.com/
The process for seal installation is as follows: We recommend removing one bolt at a time and installing each seal individually. This will help you to avoid removing the bed from your wheelbarrow. After removing the nut from the bolt it is helpful to hammer from the other side to remove the bolt completely. You will need a tube of silicone to coat the area around the seal and bolt hole. Put the seal on the bolt and replace it after applying silicone to the areas. You may need to apply a little leverage when putting the bolt back.